Klüber ISOFLEX TEL/3000 ALTEMP Sliding grease 25kg bucket

Description ISOFLEX TEL/3000 ALTEMP Sliding grease with emergency lubricating properties | N° 005060 Operators of precision-engineering and textile industry applications often have different requirements than in other industries. Precision engineering often requires greases with low friction coefficients and starting torques that provide emergency lubrication. Good low-temperature characteristics are also a frequent requirement. Temperature range: -45°C to 60°C  Volume:  25kg Benefits for your application Synthetic product for low friction and starting torque Longer component lifetime with optimised wear protection Good corrosion protection preventing premature component failure Low internal friction of the lubricant for low internally generated heat in the bearing and increased service life Applications The special product properties of ISOFLEX TEL 3000 ALTEMP facilitate its use in precision engineering and the textile industry. Typical applications of ISOFLEX TEL 3000 ALTEMP include: Rolling and plain bearings used in precision engineering at normal and low temperatures Zig-zag winding guides in spool and twisting machines Yarn guide rails in spool and twisting machines Application notes ISOFLEX TEL 3000 ALTEMP can be applied to the clean lubrication point by brush, spatula or similar application equipment. The friction point can be cleaned with commercially available cleaning agents if necessary. Technical specifications  Lower service temperature  -45 °C / -49 °F  Upper service temperature  60 °C / 140 °F  Texture  homogeneous  Texture  short-fibred  Colour space  beige  Density at 20 °C  approx. 0.95 g/cm³  Worked penetration, DIN ISO 2137, 25 °C, lower limit value  280 x 0.1 mm  Worked penetration, DIN ISO 2137, 25 °C, upper limit value  310 x 0.1 mm  Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C  approx. 19 mm²/s  Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C  approx. 4.5 mm²/s Hazard Statements (CLP) Signal word: Danger Hazard Statements (H-statements) H411: Toxic to aquatic life with long-lasting effects. Precautionary Statements (P-statements) Prevention: P273: Avoid release to the environment. Response: P391: Collect spillage. Other Relevant Information This substance/mixture contains no components in concentrations of 0.1% or higher that are classified as persistent, bioaccumulative and toxic (PBT) or very persistent and very bioaccumulative (vPvB). Does not contain any components with endocrine-disrupting properties according to REACH Article 57(f) or relevant regulations. Information on product safety (Manufacturer, Contact) KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, 49 89 7876 0, [email protected], www.klueber.com