Klüber MICROLUBE GL 261 Special lubricating grease 250ml spray can

Description Special lubricating greases for boundary friction conditions and tribo-corrosion MICROLUBE GL 261 grease is a special lubricating grease on a mineral oil base. It also contains special lithium soap and the MICROLUBE additive package, which ensures a wear-free surface finish. Running-in wear is reduced to a minimum. In addition, the MICROLUBE additive package provides protection in the boundary friction regime, thus preventing tribo-corrosion. MICROLUBE GL 261 grease has the capacity to absorb high pressures, and it has good anti-corrosion properties. Content: 250ml spray can Available in 250ml spray can, 400g cartridge, 1kg can, 25kg bucket, 180kg barrel Benefits: Optimum lubrication in the boundary friction regime, thus preventing machine downtime due to tribo-corrosion Tried-and-tested for many years and approved by OEMs Longer component life due to special additives, especially with oscillations and micro-movements Trouble-free operation of machines due to good pumpability in central lubrication systems Application: MICROLUBE GL 261 grease is particularly suitable for low to medium-speed plain and rolling bearings, and for swivel movements and vibrations. Other applications: Linear guides Serrations, multiple spline shafts Small gears, e.g. adjustment gears It is generally suitable for machine elements potentially subject to tribo-corrosion. Application notes: MICROLUBE GL 261 grease can be precisely applied by brush, spatula, grease gun, and through centralized lubrication systems.   Product data:  Chemical composition, thickener  special lithium soap  Chemical composition, type of oil  mineral oil  Lower service temperature  -30 °C / -22 °F  Upper service temperature  140 °C / 284 °F  Color space  yellow  Appearance  almost transparent  Texture  homogeneous  Texture  fibrous  Density at 20 °C  approx. 0.89 g/cm³  Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C  approx. 290 mm²/s  Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C  approx. 20 mm²/s  Worked penetration, DIN ISO 2137, 25 °C, lower limit value  310 x 0.1 mm  Worked penetration, DIN ISO 2137, 25 °C, upper limit value  340 x 0.1 mm  Speed factor (n x dm)  300 000 mm/min  Flow pressure of lubricating greases, DIN 51805, test temperature: -30 °C  <= 1 400 mbar  Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water  <= 1 corrosion degree  Drop point, DIN ISO 2176  >= 220 °C  Minimum shelf life from the date of manufacture – in a dry, frostfree place and in the unopened original container, approx.  36 months Hazard Information (CLP)      Signal word: Danger Hazard Statements (H-Sets) H222: Extremely flammable aerosol. H229: Pressurized container: May burst when heated. H304: May be fatal if swallowed and enters airways. H315: Causes skin irritation. H336: May cause drowsiness or dizziness. H411: Toxic to aquatic life with long-lasting effects. Precautionary Statements (P-Sets) Prevention: P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. P211: Do not spray on an open flame or other ignition source. P251: Do not pierce or burn, even after use. Response: P301 P310: IF SWALLOWED: Immediately call Poison Center/Doctor. P331: Do NOT induce vomiting. Storage: P410 P412: Protect from sunlight and do not expose to temperatures exceeding 50°C/122°F. Hazardous Components for Labeling Hydrocarbons, C7-C9, Isoalkanes ×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA, Information on product safety (Manufacturer, Contact) KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, 49 89 7876 0, [email protected], www.klueber.com