Klüber Nosol GBY 2 Special synthetic lubricating grease 1kg can

Description NOSOL GBY 2 Fully synthetic lubricating and sealing grease for fittings NOSOL GBY 2 is a fully synthetic lubricating and sealing grease for fittings, especially gas fittings and bearings. It is resistant to water, mineral oil, glycol-water mixtures and aliphatic gaseous and liquid hydrocarbons such as city and long-distance gases, natural gases such as natural gases and petroleum gases as well as their replacement gases as well as propane and propane-butane mixtures. Approvals Tested and approved according to DIN 3536: “Lubricant for gas fittings in domestic installations, in gas distribution and gas transport lines”, Characteristics Extended component life and surface protection due to good adhesion and good resistance to water Improved component performance and extended relubrication intervals due to the good sealing effect and resistance to city, long-distance and natural gases as well as aliphatic hydrocarbons Increased versatility of application due to the wide operating temperature range Tested and approved according to DIN EN 377 Class B and DIN 3536-10-90 DIN designation: Lubricant DIN 3536-10-90 and DIN EN 377 Class B. DIN-DVGW registration number: NG-5161BU0518. Application areas NOSOL GBY 2 is a special lubricating and sealing grease for fittings, radiator construction, in pumps, drilling and dispensing stations as well as in the refineries, chemicals and automotive industries. Application instructions NOSOL GBY 2 can be applied with a spatula, brush or other common application devices. The friction and lubrication points should be as bright as possible, i.e. free of oils, grease, hand sweat and dirt particles. Product data  NLGI grade, DIN 51818  1  Chemical composition, type of oil  mineral oil  Chemical composition, type of oil  synthetic hydrocarbon oil  Chemical composition, thickener  special lithium soap  Chemical composition  UV additive  Lower service temperature  -40 °C / -40 °F  Upper service temperature  150 °C / 266 °F  Color space  beige  Density at 20 °C  approx. 0.88 g/cm³  Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C  approx. 500 mm²/s  Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C  approx. 40 mm²/s  Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value  3 000 mPas  Shear viscosity at 25°C, shear rate 300 s-1, equipment: rotational viscometer, upper limit value  5 000 mPas  Corrosion inhibiting properties of lubricating greases, DIN51802, (SKF-EMCOR), test duration: 1 week, distilled water  <= 1 corrosion degree  Oil separation, ASTM D 6184 [FTMS 791 C 321], after 30h/100 °C  <= 4 % by weight  Drop point, DIN ISO 2176  >= 250 °C  Oxidation stability of lubricating greases, ASTM D942, 100 h/99 °C, pressure drop  <= 0.3 bar  Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating  <= 1 – 90  Minimum shelf life from the date of manufacture – in a dry, frostfree place and in the unopened original container, approx.  36 months Information on product safety (Manufacturer, Contact) KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, 49 89 7876 0, [email protected], www.klueber.com